When choosing the load capacity of the heavy duty casters, why is it necessary to leave a larger margin instead of just the calculated value? Today Xinchen Caster Factory will introduce the specific reasons:

　　Heavy duty caster wheels

　　 Generally, during the process of purchasing heavy duty casters, the caster manufacturer will give relevant suggestions on the load of the caster, which is usually higher than the calculated range. Under normal circumstances, the load refers to the general load that is moved when transported on the platform road by the actual operation of manpower. Therefore, before using this caster, it is also necessary to estimate the total weight of the transported items in advance, and then choose a caster with the appropriate load capacity according to the allowable load.

    However, in the following cases, the load of the caster will exceed the standard

    1. Uneven road surface

    After the casters are installed, three of the four often have a bearing capacity. Therefore, when the load limit is estimated to be re-arranged, it cannot be over-full, or it will exceed the construction load of the caster and endanger its normal operation.

    2. Instant impact

    It may encounter an instantaneous impact, resulting in overloading of the load. If the caster is selected according to the correct load, the overload phenomenon may often occur, resulting in damage to the caster.

    3. Overload use

    When you use a trolley or other equipment that uses casters, you will not accurately calculate the specific value of the required load, and often may exceed the standard load. This overload situation is serious or occurs frequently, it may be Let the casters be scrapped in advance, or even accidents.

    In short, when we choose casters, we can’t just choose the calculated standard load, and it will usually exceed the calculated value by a lot, especially the caster manufacturer’s technicians or caster specialty stores, and they will recommend buying casters with a higher load capacity. It's not to make more money, but because practical experience tells us that many of the above situations may cause the phenomenon of excessive load, so I give you a caster selection suggestion that confuses you!

XinChen is Chinese Caster wheels factory, we are mainly focus on high quality caster wheels development and manufacture . At our Enterprises, those are the same qualities we strive for every day. For more than 15 years we have built our reputation by producing Caster wheels, and relative injection parts.They are widely used as medical caster wheels,scaffolding caster wheels,trolley caster wheels,industrial caster wheels and heavy duty casters.As one of our oldest category we have developed hundreds kind of heavy duty caster wheels. Wide used on heavy equipment,used as trolley casters.... Size from 100mm ~ 250mm,load capacity from 100 kg ~ 15000 kg each.

  From concept to manufacturing, our consistent performance and attention to detail is legendary. If have any more questions about heavy duty caster wheels or other type of casters, please contact us freely.

• Previous: How to choose trolley caster wheels
• Next: How to distinguish the quality of medical caster wheels